The first releaseHEADmaindev-utdev

1 files changed, 430 insertions, 0 deletions

diff --git a/perf/thirdparty/rmind_ringbuf/ringbuf.c b/perf/thirdparty/rmind_ringbuf/ringbuf.c
new file mode 100644
index 0000000..75cfee9
--- /dev/null
+++ b/perf/thirdparty/rmind_ringbuf/ringbuf.c
@@ -0,0 +1,430 @@
+/*
+ * Copyright (c) 2016-2017 Mindaugas Rasiukevicius <rmind at noxt eu>
+ * All rights reserved.
+ *
+ * Use is subject to license terms, as specified in the LICENSE file.
+ */
+
+/*
+ * Atomic multi-producer single-consumer ring buffer, which supports
+ * contiguous range operations and which can be conveniently used for
+ * message passing.
+ *
+ * There are three offsets -- think of clock hands:
+ * - NEXT: marks the beginning of the available space,
+ * - WRITTEN: the point up to which the data is actually written.
+ * - Observed READY: point up to which data is ready to be written.
+ *
+ * Producers
+ *
+ *	Observe and save the 'next' offset, then request N bytes from
+ *	the ring buffer by atomically advancing the 'next' offset.  Once
+ *	the data is written into the "reserved" buffer space, the thread
+ *	clears the saved value; these observed values are used to compute
+ *	the 'ready' offset.
+ *
+ * Consumer
+ *
+ *	Writes the data between 'written' and 'ready' offsets and updates
+ *	the 'written' value.  The consumer thread scans for the lowest
+ *	seen value by the producers.
+ *
+ * Key invariant
+ *
+ *	Producers cannot go beyond the 'written' offset; producers are
+ *	also not allowed to catch up with the consumer.  Only the consumer
+ *	is allowed to catch up with the producer i.e. set the 'written'
+ *	offset to be equal to the 'next' offset.
+ *
+ * Wrap-around
+ *
+ *	If the producer cannot acquire the requested length due to little
+ *	available space at the end of the buffer, then it will wraparound.
+ *	WRAP_LOCK_BIT in 'next' offset is used to lock the 'end' offset.
+ *
+ *	There is an ABA problem if one producer stalls while a pair of
+ *	producer and consumer would both successfully wrap-around and set
+ *	the 'next' offset to the stale value of the first producer, thus
+ *	letting it to perform a successful CAS violating the invariant.
+ *	A counter in the 'next' offset (masked by WRAP_COUNTER) is used
+ *	to prevent from this problem.  It is incremented on wraparounds.
+ *
+ *	The same ABA problem could also cause a stale 'ready' offset,
+ *	which could be observed by the consumer.  We set WRAP_LOCK_BIT in
+ *	the 'seen' value before advancing the 'next' and clear this bit
+ *	after the successful advancing; this ensures that only the stable
+ *	'ready' is observed by the consumer.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <inttypes.h>
+#include <string.h>
+#include <limits.h>
+#include <errno.h>
+
+#include "ringbuf.h"
+#include "utils.h"
+
+#define	RBUF_OFF_MASK	(0x00000000ffffffffUL)
+#define	WRAP_LOCK_BIT	(0x8000000000000000UL)
+#define	RBUF_OFF_MAX	(UINT64_MAX & ~WRAP_LOCK_BIT)
+
+#define	WRAP_COUNTER	(0x7fffffff00000000UL)
+#define	WRAP_INCR(x)	(((x) + 0x100000000UL) & WRAP_COUNTER)
+
+typedef uint64_t	ringbuf_off_t;
+
+struct ringbuf_worker {
+	volatile ringbuf_off_t	seen_off;
+	int			registered;
+};
+
+struct ringbuf {
+	/* Ring buffer space. */
+	size_t			space;
+
+	/*
+	 * The NEXT hand is atomically updated by the producer.
+	 * WRAP_LOCK_BIT is set in case of wrap-around; in such case,
+	 * the producer can update the 'end' offset.
+	 */
+	volatile ringbuf_off_t	next;
+	ringbuf_off_t		end;
+
+	/* The following are updated by the consumer. */
+	ringbuf_off_t		written;
+	unsigned		nworkers;
+	ringbuf_worker_t	workers[];
+};
+
+/*
+ * ringbuf_setup: initialise a new ring buffer of a given length.
+ */
+int
+ringbuf_setup(ringbuf_t *rbuf, unsigned nworkers, size_t length)
+{
+	if (length >= RBUF_OFF_MASK) {
+		errno = EINVAL;
+		return -1;
+	}
+	memset(rbuf, 0, offsetof(ringbuf_t, workers[nworkers]));
+	rbuf->space = length;
+	rbuf->end = RBUF_OFF_MAX;
+	rbuf->nworkers = nworkers;
+	return 0;
+}
+
+/*
+ * ringbuf_get_sizes: return the sizes of the ringbuf_t and ringbuf_worker_t.
+ */
+void
+ringbuf_get_sizes(unsigned nworkers,
+    size_t *ringbuf_size, size_t *ringbuf_worker_size)
+{
+	if (ringbuf_size)
+		*ringbuf_size = offsetof(ringbuf_t, workers[nworkers]);
+	if (ringbuf_worker_size)
+		*ringbuf_worker_size = sizeof(ringbuf_worker_t);
+}
+
+/*
+ * ringbuf_register: register the worker (thread/process) as a producer
+ * and pass the pointer to its local store.
+ */
+ringbuf_worker_t *
+ringbuf_register(ringbuf_t *rbuf, unsigned i)
+{
+	ringbuf_worker_t *w = &rbuf->workers[i];
+
+	w->seen_off = RBUF_OFF_MAX;
+	atomic_store_explicit(&w->registered, true, memory_order_release);
+	return w;
+}
+
+void
+ringbuf_unregister(ringbuf_t *rbuf, ringbuf_worker_t *w)
+{
+	w->registered = false;
+	(void)rbuf;
+}
+
+/*
+ * stable_nextoff: capture and return a stable value of the 'next' offset.
+ */
+static inline ringbuf_off_t
+stable_nextoff(ringbuf_t *rbuf)
+{
+	unsigned count = SPINLOCK_BACKOFF_MIN;
+	ringbuf_off_t next;
+retry:
+	next = atomic_load_explicit(&rbuf->next, memory_order_acquire);
+	if (next & WRAP_LOCK_BIT) {
+		SPINLOCK_BACKOFF(count);
+		goto retry;
+	}
+	ASSERT((next & RBUF_OFF_MASK) < rbuf->space);
+	return next;
+}
+
+/*
+ * stable_seenoff: capture and return a stable value of the 'seen' offset.
+ */
+static inline ringbuf_off_t
+stable_seenoff(ringbuf_worker_t *w)
+{
+	unsigned count = SPINLOCK_BACKOFF_MIN;
+	ringbuf_off_t seen_off;
+retry:
+	seen_off = atomic_load_explicit(&w->seen_off, memory_order_acquire);
+	if (seen_off & WRAP_LOCK_BIT) {
+		SPINLOCK_BACKOFF(count);
+		goto retry;
+	}
+	return seen_off;
+}
+
+/*
+ * ringbuf_acquire: request a space of a given length in the ring buffer.
+ *
+ * => On success: returns the offset at which the space is available.
+ * => On failure: returns -1.
+ */
+ssize_t
+ringbuf_acquire(ringbuf_t *rbuf, ringbuf_worker_t *w, size_t len)
+{
+	ringbuf_off_t seen, next, target;
+
+	ASSERT(len > 0 && len <= rbuf->space);
+	ASSERT(w->seen_off == RBUF_OFF_MAX);
+
+	do {
+		ringbuf_off_t written;
+
+		/*
+		 * Get the stable 'next' offset.  Save the observed 'next'
+		 * value (i.e. the 'seen' offset), but mark the value as
+		 * unstable (set WRAP_LOCK_BIT).
+		 *
+		 * Note: CAS will issue a memory_order_release for us and
+		 * thus ensures that it reaches global visibility together
+		 * with new 'next'.
+		 */
+		seen = stable_nextoff(rbuf);
+		next = seen & RBUF_OFF_MASK;
+		ASSERT(next < rbuf->space);
+		atomic_store_explicit(&w->seen_off, next | WRAP_LOCK_BIT,
+		    memory_order_relaxed);
+
+		/*
+		 * Compute the target offset.  Key invariant: we cannot
+		 * go beyond the WRITTEN offset or catch up with it.
+		 */
+		target = next + len;
+		written = rbuf->written;
+		if (__predict_false(next < written && target >= written)) {
+			/* The producer must wait. */
+			atomic_store_explicit(&w->seen_off,
+			    RBUF_OFF_MAX, memory_order_release);
+			return -1;
+		}
+
+		if (__predict_false(target >= rbuf->space)) {
+			const bool exceed = target > rbuf->space;
+
+			/*
+			 * Wrap-around and start from the beginning.
+			 *
+			 * If we would exceed the buffer, then attempt to
+			 * acquire the WRAP_LOCK_BIT and use the space in
+			 * the beginning.  If we used all space exactly to
+			 * the end, then reset to 0.
+			 *
+			 * Check the invariant again.
+			 */
+			target = exceed ? (WRAP_LOCK_BIT | len) : 0;
+			if ((target & RBUF_OFF_MASK) >= written) {
+				atomic_store_explicit(&w->seen_off,
+				    RBUF_OFF_MAX, memory_order_release);
+				return -1;
+			}
+			/* Increment the wrap-around counter. */
+			target |= WRAP_INCR(seen & WRAP_COUNTER);
+		} else {
+			/* Preserve the wrap-around counter. */
+			target |= seen & WRAP_COUNTER;
+		}
+	} while (!atomic_compare_exchange_weak(&rbuf->next, &seen, target));
+
+	/*
+	 * Acquired the range.  Clear WRAP_LOCK_BIT in the 'seen' value
+	 * thus indicating that it is stable now.
+	 *
+	 * No need for memory_order_release, since CAS issued a fence.
+	 */
+	atomic_store_explicit(&w->seen_off, w->seen_off & ~WRAP_LOCK_BIT,
+	    memory_order_relaxed);
+
+	/*
+	 * If we set the WRAP_LOCK_BIT in the 'next' (because we exceed
+	 * the remaining space and need to wrap-around), then save the
+	 * 'end' offset and release the lock.
+	 */
+	if (__predict_false(target & WRAP_LOCK_BIT)) {
+		/* Cannot wrap-around again if consumer did not catch-up. */
+		ASSERT(rbuf->written <= next);
+		ASSERT(rbuf->end == RBUF_OFF_MAX);
+		rbuf->end = next;
+		next = 0;
+
+		/*
+		 * Unlock: ensure the 'end' offset reaches global
+		 * visibility before the lock is released.
+		 */
+		atomic_store_explicit(&rbuf->next,
+		    (target & ~WRAP_LOCK_BIT), memory_order_release);
+	}
+	ASSERT((target & RBUF_OFF_MASK) <= rbuf->space);
+	return (ssize_t)next;
+}
+
+/*
+ * ringbuf_produce: indicate the acquired range in the buffer is produced
+ * and is ready to be consumed.
+ */
+void
+ringbuf_produce(ringbuf_t *rbuf, ringbuf_worker_t *w)
+{
+	(void)rbuf;
+	ASSERT(w->registered);
+	ASSERT(w->seen_off != RBUF_OFF_MAX);
+	atomic_store_explicit(&w->seen_off, RBUF_OFF_MAX, memory_order_release);
+}
+
+/*
+ * ringbuf_consume: get a contiguous range which is ready to be consumed.
+ */
+size_t
+ringbuf_consume(ringbuf_t *rbuf, size_t *offset)
+{
+	ringbuf_off_t written = rbuf->written, next, ready;
+	size_t towrite;
+retry:
+	/*
+	 * Get the stable 'next' offset.  Note: stable_nextoff() issued
+	 * a load memory barrier.  The area between the 'written' offset
+	 * and the 'next' offset will be the *preliminary* target buffer
+	 * area to be consumed.
+	 */
+	next = stable_nextoff(rbuf) & RBUF_OFF_MASK;
+	if (written == next) {
+		/* If producers did not advance, then nothing to do. */
+		return 0;
+	}
+
+	/*
+	 * Observe the 'ready' offset of each producer.
+	 *
+	 * At this point, some producer might have already triggered the
+	 * wrap-around and some (or all) seen 'ready' values might be in
+	 * the range between 0 and 'written'.  We have to skip them.
+	 */
+	ready = RBUF_OFF_MAX;
+
+	for (unsigned i = 0; i < rbuf->nworkers; i++) {
+		ringbuf_worker_t *w = &rbuf->workers[i];
+		ringbuf_off_t seen_off;
+
+		/*
+		 * Skip if the worker has not registered.
+		 *
+		 * Get a stable 'seen' value.  This is necessary since we
+		 * want to discard the stale 'seen' values.
+		 */
+		if (!atomic_load_explicit(&w->registered, memory_order_relaxed))
+			continue;
+		seen_off = stable_seenoff(w);
+
+		/*
+		 * Ignore the offsets after the possible wrap-around.
+		 * We are interested in the smallest seen offset that is
+		 * not behind the 'written' offset.
+		 */
+		if (seen_off >= written) {
+			ready = MIN(seen_off, ready);
+		}
+		ASSERT(ready >= written);
+	}
+
+	/*
+	 * Finally, we need to determine whether wrap-around occurred
+	 * and deduct the safe 'ready' offset.
+	 */
+	if (next < written) {
+		const ringbuf_off_t end = MIN(rbuf->space, rbuf->end);
+
+		/*
+		 * Wrap-around case.  Check for the cut off first.
+		 *
+		 * Reset the 'written' offset if it reached the end of
+		 * the buffer or the 'end' offset (if set by a producer).
+		 * However, we must check that the producer is actually
+		 * done (the observed 'ready' offsets are clear).
+		 */
+		if (ready == RBUF_OFF_MAX && written == end) {
+			/*
+			 * Clear the 'end' offset if was set.
+			 */
+			if (rbuf->end != RBUF_OFF_MAX) {
+				rbuf->end = RBUF_OFF_MAX;
+			}
+
+			/*
+			 * Wrap-around the consumer and start from zero.
+			 */
+			written = 0;
+			atomic_store_explicit(&rbuf->written,
+			    written, memory_order_release);
+			goto retry;
+		}
+
+		/*
+		 * We cannot wrap-around yet; there is data to consume at
+		 * the end.  The ready range is smallest of the observed
+		 * 'ready' or the 'end' offset.  If neither is set, then
+		 * the actual end of the buffer.
+		 */
+		ASSERT(ready > next);
+		ready = MIN(ready, end);
+		ASSERT(ready >= written);
+	} else {
+		/*
+		 * Regular case.  Up to the observed 'ready' (if set)
+		 * or the 'next' offset.
+		 */
+		ready = MIN(ready, next);
+	}
+	towrite = ready - written;
+	*offset = written;
+
+	ASSERT(ready >= written);
+	ASSERT(towrite <= rbuf->space);
+	return towrite;
+}
+
+/*
+ * ringbuf_release: indicate that the consumed range can now be released.
+ */
+void
+ringbuf_release(ringbuf_t *rbuf, size_t nbytes)
+{
+	const size_t nwritten = rbuf->written + nbytes;
+
+	ASSERT(rbuf->written <= rbuf->space);
+	ASSERT(rbuf->written <= rbuf->end);
+	ASSERT(nwritten <= rbuf->space);
+
+	rbuf->written = (nwritten == rbuf->space) ? 0 : nwritten;
+}