1 files changed, 171 insertions, 0 deletions
diff --git a/PCAP-PIC/kafka/config/server.properties b/PCAP-PIC/kafka/config/server.properties
new file mode 100644
index 0000000..9ee1457
--- /dev/null
+++ b/PCAP-PIC/kafka/config/server.properties
@@ -0,0 +1,171 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# see kafka.server.KafkaConfig for additional details and defaults
+
+############################# Server Basics #############################
+listeners=SASL_PLAINTEXT://192.168.10.193:9094,PLAINTEXT://192.168.10.193:9092,SSL://192.168.10.193:9095
+advertised.listeners=SASL_PLAINTEXT://192.168.10.193:9094,PLAINTEXT://192.168.10.193:9092,SSL://192.168.10.193:9095
+ssl.keystore.location=/home/tsg/olap/kafka_2.11-1.0.0/config/keystore.jks
+ssl.keystore.password=galaxy2019
+ssl.key.password=galaxy2019
+ssl.truststore.location=/home/tsg/olap/kafka_2.11-1.0.0/config/truststore.jks
+ssl.truststore.password=galaxy2019
+#ssl.client.auth=required
+ssl.enabled.protocols=TLSv1.2,TLSv1.1,TLSv1
+ssl.keystore.type=JKS 
+ssl.truststore.type=JKS 
+
+# kafka2.0.x开始，将ssl.endpoint.identification.algorithm设置为了HTTPS，即:需要验证主机名
+# 如果不需要验证主机名，那么可以这么设置 ssl.endpoint.identification.algorithm=即可
+ssl.endpoint.identification.algorithm=
+
+# 设置内部访问也用SSL，默认值为security.inter.broker.protocol=PLAINTEXT
+security.inter.broker.protocol=SASL_PLAINTEXT
+
+#sasl配置
+sasl.mechanism.inter.broker.protocol=PLAIN
+sasl.enabled.mechanisms=PLAIN
+
+# The id of the broker. This must be set to a unique integer for each broker.
+broker.id=1
+
+############################# Socket Server Settings #############################
+#Is it deleted directlytopic
+delete.topic.enable=true
+
+#Are you allowed to create automatically topic
+auto.create.topics.enable=false
+
+#Enable log periodic deletion strategy
+log.cleanup.policy=delete
+
+# The number of threads that the server uses for receiving requests from the network and sending responses to the network
+num.network.threads=3
+
+# The number of threads that the server uses for processing requests, which may include disk I/O
+num.io.threads=8
+
+# The send buffer (SO_SNDBUF) used by the socket server
+socket.send.buffer.bytes=10485760
+
+# The receive buffer (SO_RCVBUF) used by the socket server
+socket.receive.buffer.bytes=10485760
+
+# The maximum size of a request that the socket server will accept (protection against OOM)
+#socket.request.max.bytes=2147483600
+socket.request.max.bytes=104857600
+
+#The maximum size of a message body, unit byte.
+message.max.bytes=10485760
+
+#replicas Maximum size of data obtained eachtime
+replica.fetch.max.bytes=20485760
+
+############################# Log Basics #############################
+
+# A comma seperated list of directories under which to store log files
+log.dirs=/home/tsg/olap/kafka_2.11-1.0.0/kafka-logs
+
+# The default number of log partitions per topic. More partitions allow greater
+# parallelism for consumption, but this will also result in more files across
+# the brokers.
+num.partitions=1
+
+# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
+# This value is recommended to be increased for installations with data dirs located in RAID array.
+num.recovery.threads.per.data.dir=1
+
+############################# Internal Topic Settings  #############################
+# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
+# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
+offsets.topic.replication.factor=3
+
+#事务主题的复制因子（设置更高以确保可用性）。 内部主题创建将失败，直到群集大小满足此复制因素要求
+transaction.state.log.replication.factor=3
+
+#覆盖事务主题的min.insync.replicas配置，在min.insync.replicas中，replicas数量为1，该参数将默认replicas定义为2
+transaction.state.log.min.isr=2
+
+#是否允许非ISR的Replica参与竞选Leader。
+unclean.leader.election.enable=true
+
+#如果某个Partition的Leader挂掉，则当原来挂掉的Broker恢复正常以后，可以夺回Leader
+auto.leader.rebalance.enable=true
+
+############################# Log Flush Policy #############################
+
+# Messages are immediately written to the filesystem but by default we only fsync() to sync
+# the OS cache lazily. The following configurations control the flush of data to disk.
+# There are a few important trade-offs here:
+#    1. Durability: Unflushed data may be lost if you are not using replication.
+#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
+#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
+# The settings below allow one to configure the flush policy to flush data after a period of time or
+# every N messages (or both). This can be done globally and overridden on a per-topic basis.
+
+# The number of messages to accept before forcing a flush of data to disk
+#log.flush.interval.messages=10000
+
+# The maximum amount of time a message can sit in a log before we force a flush
+#log.flush.interval.ms=1000
+
+############################# Log Retention Policy #############################
+
+# The following configurations control the disposal of log segments. The policy can
+# be set to delete segments after a period of time, or after a given size has accumulated.
+# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
+# from the end of the log.
+
+# The minimum age of a log file to be eligible for deletion due to age
+log.retention.hours=168
+
+# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
+# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
+log.retention.bytes=10737418240
+
+# The maximum size of a log segment file. When this size is reached a new log segment will be created.
+log.segment.bytes=1073741824
+
+# The interval at which log segments are checked to see if they can be deleted according
+# to the retention policies
+log.retention.check.interval.ms=300000
+
+############################# Zookeeper #############################
+
+# Zookeeper connection string (see zookeeper docs for details).
+# This is a comma separated host:port pairs, each corresponding to a zk
+# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
+# You can also append an optional chroot string to the urls to specify the
+# root directory for all kafka znodes.
+zookeeper.connect=192.168.10.193:2181,192.168.10.194:2181,192.168.10.195:2181/kafka
+
+# Timeout in ms for connecting to zookeeper
+zookeeper.connection.timeout.ms=60000
+
+#zookeeper session超时时间
+zookeeper.session.timeout.ms=60000
+
+#Set zookeeper client to use secure ACLs
+zookeeper.set.acl=false
+
+############################# Group Coordinator Settings #############################
+
+# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
+# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
+# The default value for this is 3 seconds.
+# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
+# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
+group.initial.rebalance.delay.ms=0