diff options
Diffstat (limited to 'MSH-PIC/kafka/config')
21 files changed, 872 insertions, 0 deletions
diff --git a/MSH-PIC/kafka/config/client-ssl.properties b/MSH-PIC/kafka/config/client-ssl.properties new file mode 100644 index 0000000..050096f --- /dev/null +++ b/MSH-PIC/kafka/config/client-ssl.properties @@ -0,0 +1,6 @@ +security.protocol=SSL +ssl.truststore.location=/usr/ca/trust/client.truststore.jks +ssl.truststore.password=ceiec2019 +ssl.keystore.location=/usr/ca/client/client.keystore.jks +ssl.keystore.password=ceiec2019 +ssl.key.password=ceiec2019 diff --git a/MSH-PIC/kafka/config/connect-console-sink.properties b/MSH-PIC/kafka/config/connect-console-sink.properties new file mode 100644 index 0000000..e240a8f --- /dev/null +++ b/MSH-PIC/kafka/config/connect-console-sink.properties @@ -0,0 +1,19 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +name=local-console-sink +connector.class=org.apache.kafka.connect.file.FileStreamSinkConnector +tasks.max=1 +topics=connect-test
\ No newline at end of file diff --git a/MSH-PIC/kafka/config/connect-console-source.properties b/MSH-PIC/kafka/config/connect-console-source.properties new file mode 100644 index 0000000..d0e2069 --- /dev/null +++ b/MSH-PIC/kafka/config/connect-console-source.properties @@ -0,0 +1,19 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +name=local-console-source +connector.class=org.apache.kafka.connect.file.FileStreamSourceConnector +tasks.max=1 +topic=connect-test
\ No newline at end of file diff --git a/MSH-PIC/kafka/config/connect-distributed.properties b/MSH-PIC/kafka/config/connect-distributed.properties new file mode 100644 index 0000000..5f3f358 --- /dev/null +++ b/MSH-PIC/kafka/config/connect-distributed.properties @@ -0,0 +1,93 @@ +## +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +## + +# This file contains some of the configurations for the Kafka Connect distributed worker. This file is intended +# to be used with the examples, and some settings may differ from those used in a production system, especially +# the `bootstrap.servers` and those specifying replication factors. + +# A list of host/port pairs to use for establishing the initial connection to the Kafka cluster. +bootstrap.servers=localhost:9092 + +# unique name for the cluster, used in forming the Connect cluster group. Note that this must not conflict with consumer group IDs +group.id=connect-cluster + +# The converters specify the format of data in Kafka and how to translate it into Connect data. Every Connect user will +# need to configure these based on the format they want their data in when loaded from or stored into Kafka +key.converter=org.apache.kafka.connect.json.JsonConverter +value.converter=org.apache.kafka.connect.json.JsonConverter +# Converter-specific settings can be passed in by prefixing the Converter's setting with the converter we want to apply +# it to +key.converter.schemas.enable=true +value.converter.schemas.enable=true + +# The internal converter used for offsets, config, and status data is configurable and must be specified, but most users will +# always want to use the built-in default. Offset, config, and status data is never visible outside of Kafka Connect in this format. +internal.key.converter=org.apache.kafka.connect.json.JsonConverter +internal.value.converter=org.apache.kafka.connect.json.JsonConverter +internal.key.converter.schemas.enable=false +internal.value.converter.schemas.enable=false + +# Topic to use for storing offsets. This topic should have many partitions and be replicated and compacted. +# Kafka Connect will attempt to create the topic automatically when needed, but you can always manually create +# the topic before starting Kafka Connect if a specific topic configuration is needed. +# Most users will want to use the built-in default replication factor of 3 or in some cases even specify a larger value. +# Since this means there must be at least as many brokers as the maximum replication factor used, we'd like to be able +# to run this example on a single-broker cluster and so here we instead set the replication factor to 1. +offset.storage.topic=connect-offsets +offset.storage.replication.factor=1 +#offset.storage.partitions=25 + +# Topic to use for storing connector and task configurations; note that this should be a single partition, highly replicated, +# and compacted topic. Kafka Connect will attempt to create the topic automatically when needed, but you can always manually create +# the topic before starting Kafka Connect if a specific topic configuration is needed. +# Most users will want to use the built-in default replication factor of 3 or in some cases even specify a larger value. +# Since this means there must be at least as many brokers as the maximum replication factor used, we'd like to be able +# to run this example on a single-broker cluster and so here we instead set the replication factor to 1. +config.storage.topic=connect-configs +config.storage.replication.factor=1 + +# Topic to use for storing statuses. This topic can have multiple partitions and should be replicated and compacted. +# Kafka Connect will attempt to create the topic automatically when needed, but you can always manually create +# the topic before starting Kafka Connect if a specific topic configuration is needed. +# Most users will want to use the built-in default replication factor of 3 or in some cases even specify a larger value. +# Since this means there must be at least as many brokers as the maximum replication factor used, we'd like to be able +# to run this example on a single-broker cluster and so here we instead set the replication factor to 1. +status.storage.topic=connect-status +status.storage.replication.factor=1 +#status.storage.partitions=5 + +# Flush much faster than normal, which is useful for testing/debugging +offset.flush.interval.ms=10000 + +# These are provided to inform the user about the presence of the REST host and port configs +# Hostname & Port for the REST API to listen on. If this is set, it will bind to the interface used to listen to requests. +#rest.host.name= +#rest.port=8083 + +# The Hostname & Port that will be given out to other workers to connect to i.e. URLs that are routable from other servers. +#rest.advertised.host.name= +#rest.advertised.port= + +# Set to a list of filesystem paths separated by commas (,) to enable class loading isolation for plugins +# (connectors, converters, transformations). The list should consist of top level directories that include +# any combination of: +# a) directories immediately containing jars with plugins and their dependencies +# b) uber-jars with plugins and their dependencies +# c) directories immediately containing the package directory structure of classes of plugins and their dependencies +# Examples: +# plugin.path=/usr/local/share/java,/usr/local/share/kafka/plugins,/opt/connectors, +#plugin.path= diff --git a/MSH-PIC/kafka/config/connect-file-sink.properties b/MSH-PIC/kafka/config/connect-file-sink.properties new file mode 100644 index 0000000..594ccc6 --- /dev/null +++ b/MSH-PIC/kafka/config/connect-file-sink.properties @@ -0,0 +1,20 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +name=local-file-sink +connector.class=FileStreamSink +tasks.max=1 +file=test.sink.txt +topics=connect-test
\ No newline at end of file diff --git a/MSH-PIC/kafka/config/connect-file-source.properties b/MSH-PIC/kafka/config/connect-file-source.properties new file mode 100644 index 0000000..599cf4c --- /dev/null +++ b/MSH-PIC/kafka/config/connect-file-source.properties @@ -0,0 +1,20 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +name=local-file-source +connector.class=FileStreamSource +tasks.max=1 +file=test.txt +topic=connect-test
\ No newline at end of file diff --git a/MSH-PIC/kafka/config/connect-log4j.properties b/MSH-PIC/kafka/config/connect-log4j.properties new file mode 100644 index 0000000..808addb --- /dev/null +++ b/MSH-PIC/kafka/config/connect-log4j.properties @@ -0,0 +1,25 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +log4j.rootLogger=INFO, stdout + + +log4j.appender.stdout=org.apache.log4j.ConsoleAppender +log4j.appender.stdout.layout=org.apache.log4j.PatternLayout +log4j.appender.stdout.layout.ConversionPattern=[%d] %p %m (%c:%L)%n + +log4j.logger.org.apache.zookeeper=ERROR +log4j.logger.org.I0Itec.zkclient=ERROR +log4j.logger.org.reflections=ERROR diff --git a/MSH-PIC/kafka/config/connect-standalone.properties b/MSH-PIC/kafka/config/connect-standalone.properties new file mode 100644 index 0000000..0039796 --- /dev/null +++ b/MSH-PIC/kafka/config/connect-standalone.properties @@ -0,0 +1,48 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# These are defaults. This file just demonstrates how to override some settings. +bootstrap.servers=localhost:9092 + +# The converters specify the format of data in Kafka and how to translate it into Connect data. Every Connect user will +# need to configure these based on the format they want their data in when loaded from or stored into Kafka +key.converter=org.apache.kafka.connect.json.JsonConverter +value.converter=org.apache.kafka.connect.json.JsonConverter +# Converter-specific settings can be passed in by prefixing the Converter's setting with the converter we want to apply +# it to +key.converter.schemas.enable=true +value.converter.schemas.enable=true + +# The internal converter used for offsets and config data is configurable and must be specified, but most users will +# always want to use the built-in default. Offset and config data is never visible outside of Kafka Connect in this format. +internal.key.converter=org.apache.kafka.connect.json.JsonConverter +internal.value.converter=org.apache.kafka.connect.json.JsonConverter +internal.key.converter.schemas.enable=false +internal.value.converter.schemas.enable=false + +offset.storage.file.filename=/tmp/connect.offsets +# Flush much faster than normal, which is useful for testing/debugging +offset.flush.interval.ms=10000 + +# Set to a list of filesystem paths separated by commas (,) to enable class loading isolation for plugins +# (connectors, converters, transformations). The list should consist of top level directories that include +# any combination of: +# a) directories immediately containing jars with plugins and their dependencies +# b) uber-jars with plugins and their dependencies +# c) directories immediately containing the package directory structure of classes of plugins and their dependencies +# Note: symlinks will be followed to discover dependencies or plugins. +# Examples: +# plugin.path=/usr/local/share/java,/usr/local/share/kafka/plugins,/opt/connectors, +#plugin.path= diff --git a/MSH-PIC/kafka/config/consumer.properties b/MSH-PIC/kafka/config/consumer.properties new file mode 100644 index 0000000..01bb12e --- /dev/null +++ b/MSH-PIC/kafka/config/consumer.properties @@ -0,0 +1,26 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# see org.apache.kafka.clients.consumer.ConsumerConfig for more details + +# list of brokers used for bootstrapping knowledge about the rest of the cluster +# format: host1:port1,host2:port2 ... +bootstrap.servers=localhost:9092 + +# consumer group id +group.id=test-consumer-group + +# What to do when there is no initial offset in Kafka or if the current +# offset does not exist any more on the server: latest, earliest, none +#auto.offset.reset= diff --git a/MSH-PIC/kafka/config/kafka_client_jaas.conf b/MSH-PIC/kafka/config/kafka_client_jaas.conf new file mode 100644 index 0000000..5f8cde7 --- /dev/null +++ b/MSH-PIC/kafka/config/kafka_client_jaas.conf @@ -0,0 +1,5 @@ +KafkaClient { + org.apache.kafka.common.security.plain.PlainLoginModule required + username="admin" + password="galaxy2019"; +}; diff --git a/MSH-PIC/kafka/config/kafka_server_jaas.conf b/MSH-PIC/kafka/config/kafka_server_jaas.conf new file mode 100644 index 0000000..e71cd1b --- /dev/null +++ b/MSH-PIC/kafka/config/kafka_server_jaas.conf @@ -0,0 +1,7 @@ +KafkaServer { + org.apache.kafka.common.security.plain.PlainLoginModule required + username="admin" + password="galaxy2019" + user_admin="galaxy2019" + user_gohangout="galaxy2019"; +}; diff --git a/MSH-PIC/kafka/config/keystore.jks b/MSH-PIC/kafka/config/keystore.jks Binary files differnew file mode 100644 index 0000000..2e2328b --- /dev/null +++ b/MSH-PIC/kafka/config/keystore.jks diff --git a/MSH-PIC/kafka/config/log4j.properties b/MSH-PIC/kafka/config/log4j.properties new file mode 100644 index 0000000..e635624 --- /dev/null +++ b/MSH-PIC/kafka/config/log4j.properties @@ -0,0 +1,92 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Unspecified loggers and loggers with additivity=true output to server.log and stdout +# Note that INFO only applies to unspecified loggers, the log level of the child logger is used otherwise +log4j.rootLogger=WARN, stdout, kafkaAppender + +log4j.appender.stdout=org.apache.log4j.ConsoleAppender +log4j.appender.stdout.layout=org.apache.log4j.PatternLayout +log4j.appender.stdout.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +log4j.appender.kafkaAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.kafkaAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.kafkaAppender.File=${kafka.logs.dir}/server.log +log4j.appender.kafkaAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.kafkaAppender.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +log4j.appender.stateChangeAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.stateChangeAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.stateChangeAppender.File=${kafka.logs.dir}/state-change.log +log4j.appender.stateChangeAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.stateChangeAppender.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +log4j.appender.requestAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.requestAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.requestAppender.File=${kafka.logs.dir}/kafka-request.log +log4j.appender.requestAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.requestAppender.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +log4j.appender.cleanerAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.cleanerAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.cleanerAppender.File=${kafka.logs.dir}/log-cleaner.log +log4j.appender.cleanerAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.cleanerAppender.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +log4j.appender.controllerAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.controllerAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.controllerAppender.File=${kafka.logs.dir}/controller.log +log4j.appender.controllerAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.controllerAppender.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +log4j.appender.authorizerAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.authorizerAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.authorizerAppender.File=${kafka.logs.dir}/kafka-authorizer.log +log4j.appender.authorizerAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.authorizerAppender.layout.ConversionPattern=[%d{yyyy-MM-dd HH:mm:ssZ}] %p %m (%c)%n + +# Change the two lines below to adjust ZK client logging +log4j.logger.org.I0Itec.zkclient.ZkClient=WARN +log4j.logger.org.apache.zookeeper=WARN + +# Change the two lines below to adjust the general broker logging level (output to server.log and stdout) +log4j.logger.kafka=WARN +log4j.logger.org.apache.kafka=WARN + +# Change to DEBUG or TRACE to enable request logging +log4j.logger.kafka.request.logger=WARN, requestAppender +log4j.additivity.kafka.request.logger=false + +# Uncomment the lines below and change log4j.logger.kafka.network.RequestChannel$ to TRACE for additional output +# related to the handling of requests +#log4j.logger.kafka.network.Processor=TRACE, requestAppender +#log4j.logger.kafka.server.KafkaApis=TRACE, requestAppender +#log4j.additivity.kafka.server.KafkaApis=false +log4j.logger.kafka.network.RequestChannel$=WARN, requestAppender +log4j.additivity.kafka.network.RequestChannel$=false + +log4j.logger.kafka.controller=TRACE, controllerAppender +log4j.additivity.kafka.controller=false + +log4j.logger.kafka.log.LogCleaner=INFO, cleanerAppender +log4j.additivity.kafka.log.LogCleaner=false + +log4j.logger.state.change.logger=TRACE, stateChangeAppender +log4j.additivity.state.change.logger=false + +# Access denials are logged at INFO level, change to DEBUG to also log allowed accesses +log4j.logger.kafka.authorizer.logger=INFO, authorizerAppender +log4j.additivity.kafka.authorizer.logger=false + diff --git a/MSH-PIC/kafka/config/log4j.properties_bak b/MSH-PIC/kafka/config/log4j.properties_bak new file mode 100644 index 0000000..d278a67 --- /dev/null +++ b/MSH-PIC/kafka/config/log4j.properties_bak @@ -0,0 +1,92 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Unspecified loggers and loggers with additivity=true output to server.log and stdout +# Note that INFO only applies to unspecified loggers, the log level of the child logger is used otherwise +log4j.rootLogger=WARN, stdout, kafkaAppender + +log4j.appender.stdout=org.apache.log4j.ConsoleAppender +log4j.appender.stdout.layout=org.apache.log4j.PatternLayout +log4j.appender.stdout.layout.ConversionPattern=[%d] %p %m (%c)%n + +log4j.appender.kafkaAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.kafkaAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.kafkaAppender.File=${kafka.logs.dir}/server.log +log4j.appender.kafkaAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.kafkaAppender.layout.ConversionPattern=[%d] %p %m (%c)%n + +log4j.appender.stateChangeAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.stateChangeAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.stateChangeAppender.File=${kafka.logs.dir}/state-change.log +log4j.appender.stateChangeAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.stateChangeAppender.layout.ConversionPattern=[%d] %p %m (%c)%n + +log4j.appender.requestAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.requestAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.requestAppender.File=${kafka.logs.dir}/kafka-request.log +log4j.appender.requestAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.requestAppender.layout.ConversionPattern=[%d] %p %m (%c)%n + +log4j.appender.cleanerAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.cleanerAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.cleanerAppender.File=${kafka.logs.dir}/log-cleaner.log +log4j.appender.cleanerAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.cleanerAppender.layout.ConversionPattern=[%d] %p %m (%c)%n + +log4j.appender.controllerAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.controllerAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.controllerAppender.File=${kafka.logs.dir}/controller.log +log4j.appender.controllerAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.controllerAppender.layout.ConversionPattern=[%d] %p %m (%c)%n + +log4j.appender.authorizerAppender=org.apache.log4j.DailyRollingFileAppender +log4j.appender.authorizerAppender.DatePattern='.'yyyy-MM-dd +log4j.appender.authorizerAppender.File=${kafka.logs.dir}/kafka-authorizer.log +log4j.appender.authorizerAppender.layout=org.apache.log4j.PatternLayout +log4j.appender.authorizerAppender.layout.ConversionPattern=[%d] %p %m (%c)%n + +# Change the two lines below to adjust ZK client logging +log4j.logger.org.I0Itec.zkclient.ZkClient=WARN +log4j.logger.org.apache.zookeeper=WARN + +# Change the two lines below to adjust the general broker logging level (output to server.log and stdout) +log4j.logger.kafka=WARN +log4j.logger.org.apache.kafka=WARN + +# Change to DEBUG or TRACE to enable request logging +log4j.logger.kafka.request.logger=WARN, requestAppender +log4j.additivity.kafka.request.logger=false + +# Uncomment the lines below and change log4j.logger.kafka.network.RequestChannel$ to TRACE for additional output +# related to the handling of requests +#log4j.logger.kafka.network.Processor=TRACE, requestAppender +#log4j.logger.kafka.server.KafkaApis=TRACE, requestAppender +#log4j.additivity.kafka.server.KafkaApis=false +log4j.logger.kafka.network.RequestChannel$=WARN, requestAppender +log4j.additivity.kafka.network.RequestChannel$=false + +log4j.logger.kafka.controller=TRACE, controllerAppender +log4j.additivity.kafka.controller=false + +log4j.logger.kafka.log.LogCleaner=INFO, cleanerAppender +log4j.additivity.kafka.log.LogCleaner=false + +log4j.logger.state.change.logger=TRACE, stateChangeAppender +log4j.additivity.state.change.logger=false + +# Access denials are logged at INFO level, change to DEBUG to also log allowed accesses +log4j.logger.kafka.authorizer.logger=INFO, authorizerAppender +log4j.additivity.kafka.authorizer.logger=false + diff --git a/MSH-PIC/kafka/config/producer.properties b/MSH-PIC/kafka/config/producer.properties new file mode 100644 index 0000000..750b95e --- /dev/null +++ b/MSH-PIC/kafka/config/producer.properties @@ -0,0 +1,45 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# see org.apache.kafka.clients.producer.ProducerConfig for more details + +############################# Producer Basics ############################# + +# list of brokers used for bootstrapping knowledge about the rest of the cluster +# format: host1:port1,host2:port2 ... +bootstrap.servers=localhost:9092 + +# specify the compression codec for all data generated: none, gzip, snappy, lz4 +compression.type=none + +# name of the partitioner class for partitioning events; default partition spreads data randomly +#partitioner.class= + +# the maximum amount of time the client will wait for the response of a request +#request.timeout.ms= + +# how long `KafkaProducer.send` and `KafkaProducer.partitionsFor` will block for +#max.block.ms= + +# the producer will wait for up to the given delay to allow other records to be sent so that the sends can be batched together +#linger.ms= + +# the maximum size of a request in bytes +#max.request.size= + +# the default batch size in bytes when batching multiple records sent to a partition +#batch.size= + +# the total bytes of memory the producer can use to buffer records waiting to be sent to the server +#buffer.memory= diff --git a/MSH-PIC/kafka/config/sasl-config.properties b/MSH-PIC/kafka/config/sasl-config.properties new file mode 100644 index 0000000..97af693 --- /dev/null +++ b/MSH-PIC/kafka/config/sasl-config.properties @@ -0,0 +1,7 @@ +security.protocol=SASL_PLAINTEXT +sasl.mechanism=PLAIN +#sasl.user: gohangout +#sasl.password: ceiec2019 +#ssl.truststore.location=/usr/ca/trust/client.truststore.jks +#ssl.truststore.password=ceiec2019 + diff --git a/MSH-PIC/kafka/config/server.properties b/MSH-PIC/kafka/config/server.properties new file mode 100644 index 0000000..512db77 --- /dev/null +++ b/MSH-PIC/kafka/config/server.properties @@ -0,0 +1,171 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# see kafka.server.KafkaConfig for additional details and defaults + +############################# Server Basics ############################# +listeners=SASL_PLAINTEXT://192.168.20.193:9094,PLAINTEXT://192.168.20.193:9092,SSL://192.168.20.193:9095 +advertised.listeners=SASL_PLAINTEXT://192.168.20.193:9094,PLAINTEXT://192.168.20.193:9092,SSL://192.168.20.193:9095 +ssl.keystore.location=/home/tsg/olap/kafka_2.11-1.0.0/config/keystore.jks +ssl.keystore.password=galaxy2019 +ssl.key.password=galaxy2019 +ssl.truststore.location=/home/tsg/olap/kafka_2.11-1.0.0/config/truststore.jks +ssl.truststore.password=galaxy2019 +#ssl.client.auth=required +ssl.enabled.protocols=TLSv1.2,TLSv1.1,TLSv1 +ssl.keystore.type=JKS +ssl.truststore.type=JKS + +# kafka2.0.x开始，将ssl.endpoint.identification.algorithm设置为了HTTPS，即:需要验证主机名 +# 如果不需要验证主机名，那么可以这么设置 ssl.endpoint.identification.algorithm=即可 +ssl.endpoint.identification.algorithm= + +# 设置内部访问也用SSL，默认值为security.inter.broker.protocol=PLAINTEXT +security.inter.broker.protocol=SASL_PLAINTEXT + +#sasl配置 +sasl.mechanism.inter.broker.protocol=PLAIN +sasl.enabled.mechanisms=PLAIN + +# The id of the broker. This must be set to a unique integer for each broker. +broker.id=1 + +############################# Socket Server Settings ############################# +#Is it deleted directlytopic +delete.topic.enable=true + +#Are you allowed to create automatically topic +auto.create.topics.enable=false + +#Enable log periodic deletion strategy +log.cleanup.policy=delete + +# The number of threads that the server uses for receiving requests from the network and sending responses to the network +num.network.threads=3 + +# The number of threads that the server uses for processing requests, which may include disk I/O +num.io.threads=8 + +# The send buffer (SO_SNDBUF) used by the socket server +socket.send.buffer.bytes=10485760 + +# The receive buffer (SO_RCVBUF) used by the socket server +socket.receive.buffer.bytes=10485760 + +# The maximum size of a request that the socket server will accept (protection against OOM) +#socket.request.max.bytes=2147483600 +socket.request.max.bytes=104857600 + +#The maximum size of a message body, unit byte. +message.max.bytes=10485760 + +#replicas Maximum size of data obtained eachtime +replica.fetch.max.bytes=20485760 + +############################# Log Basics ############################# + +# A comma seperated list of directories under which to store log files +log.dirs=/home/tsg/olap/kafka_2.11-1.0.0/kafka-logs + +# The default number of log partitions per topic. More partitions allow greater +# parallelism for consumption, but this will also result in more files across +# the brokers. +num.partitions=1 + +# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown. +# This value is recommended to be increased for installations with data dirs located in RAID array. +num.recovery.threads.per.data.dir=1 + +############################# Internal Topic Settings ############################# +# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state" +# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3. +offsets.topic.replication.factor=3 + +#事务主题的复制因子（设置更高以确保可用性）。 内部主题创建将失败，直到群集大小满足此复制因素要求 +transaction.state.log.replication.factor=3 + +#覆盖事务主题的min.insync.replicas配置，在min.insync.replicas中，replicas数量为1，该参数将默认replicas定义为2 +transaction.state.log.min.isr=2 + +#是否允许非ISR的Replica参与竞选Leader。 +unclean.leader.election.enable=true + +#如果某个Partition的Leader挂掉，则当原来挂掉的Broker恢复正常以后，可以夺回Leader +auto.leader.rebalance.enable=true + +############################# Log Flush Policy ############################# + +# Messages are immediately written to the filesystem but by default we only fsync() to sync +# the OS cache lazily. The following configurations control the flush of data to disk. +# There are a few important trade-offs here: +# 1. Durability: Unflushed data may be lost if you are not using replication. +# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush. +# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks. +# The settings below allow one to configure the flush policy to flush data after a period of time or +# every N messages (or both). This can be done globally and overridden on a per-topic basis. + +# The number of messages to accept before forcing a flush of data to disk +#log.flush.interval.messages=10000 + +# The maximum amount of time a message can sit in a log before we force a flush +#log.flush.interval.ms=1000 + +############################# Log Retention Policy ############################# + +# The following configurations control the disposal of log segments. The policy can +# be set to delete segments after a period of time, or after a given size has accumulated. +# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens +# from the end of the log. + +# The minimum age of a log file to be eligible for deletion due to age +log.retention.hours=168 + +# A size-based retention policy for logs. Segments are pruned from the log unless the remaining +# segments drop below log.retention.bytes. Functions independently of log.retention.hours. +log.retention.bytes=10737418240 + +# The maximum size of a log segment file. When this size is reached a new log segment will be created. +log.segment.bytes=1073741824 + +# The interval at which log segments are checked to see if they can be deleted according +# to the retention policies +log.retention.check.interval.ms=300000 + +############################# Zookeeper ############################# + +# Zookeeper connection string (see zookeeper docs for details). +# This is a comma separated host:port pairs, each corresponding to a zk +# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002". +# You can also append an optional chroot string to the urls to specify the +# root directory for all kafka znodes. +zookeeper.connect=192.168.20.193:2181,192.168.20.194:2181,192.168.20.195:2181/kafka + +# Timeout in ms for connecting to zookeeper +zookeeper.connection.timeout.ms=60000 + +#zookeeper session超时时间 +zookeeper.session.timeout.ms=60000 + +#Set zookeeper client to use secure ACLs +zookeeper.set.acl=false + +############################# Group Coordinator Settings ############################# + +# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance. +# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms. +# The default value for this is 3 seconds. +# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing. +# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup. +group.initial.rebalance.delay.ms=0 diff --git a/MSH-PIC/kafka/config/server.properties.bak b/MSH-PIC/kafka/config/server.properties.bak new file mode 100644 index 0000000..250ce16 --- /dev/null +++ b/MSH-PIC/kafka/config/server.properties.bak @@ -0,0 +1,136 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# see kafka.server.KafkaConfig for additional details and defaults + +############################# Server Basics ############################# + +# The id of the broker. This must be set to a unique integer for each broker. +broker.id=0 + +############################# Socket Server Settings ############################# + +# The address the socket server listens on. It will get the value returned from +# java.net.InetAddress.getCanonicalHostName() if not configured. +# FORMAT: +# listeners = listener_name://host_name:port +# EXAMPLE: +# listeners = PLAINTEXT://your.host.name:9092 +#listeners=PLAINTEXT://:9092 + +# Hostname and port the broker will advertise to producers and consumers. If not set, +# it uses the value for "listeners" if configured. Otherwise, it will use the value +# returned from java.net.InetAddress.getCanonicalHostName(). +#advertised.listeners=PLAINTEXT://your.host.name:9092 + +# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details +#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL + +# The number of threads that the server uses for receiving requests from the network and sending responses to the network +num.network.threads=3 + +# The number of threads that the server uses for processing requests, which may include disk I/O +num.io.threads=8 + +# The send buffer (SO_SNDBUF) used by the socket server +socket.send.buffer.bytes=102400 + +# The receive buffer (SO_RCVBUF) used by the socket server +socket.receive.buffer.bytes=102400 + +# The maximum size of a request that the socket server will accept (protection against OOM) +socket.request.max.bytes=104857600 + + +############################# Log Basics ############################# + +# A comma seperated list of directories under which to store log files +log.dirs=/tmp/kafka-logs + +# The default number of log partitions per topic. More partitions allow greater +# parallelism for consumption, but this will also result in more files across +# the brokers. +num.partitions=1 + +# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown. +# This value is recommended to be increased for installations with data dirs located in RAID array. +num.recovery.threads.per.data.dir=1 + +############################# Internal Topic Settings ############################# +# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state" +# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3. +offsets.topic.replication.factor=1 +transaction.state.log.replication.factor=1 +transaction.state.log.min.isr=1 + +############################# Log Flush Policy ############################# + +# Messages are immediately written to the filesystem but by default we only fsync() to sync +# the OS cache lazily. The following configurations control the flush of data to disk. +# There are a few important trade-offs here: +# 1. Durability: Unflushed data may be lost if you are not using replication. +# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush. +# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks. +# The settings below allow one to configure the flush policy to flush data after a period of time or +# every N messages (or both). This can be done globally and overridden on a per-topic basis. + +# The number of messages to accept before forcing a flush of data to disk +log.flush.interval.messages=20000 + +# The maximum amount of time a message can sit in a log before we force a flush +log.flush.interval.ms=2000 + +############################# Log Retention Policy ############################# + +# The following configurations control the disposal of log segments. The policy can +# be set to delete segments after a period of time, or after a given size has accumulated. +# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens +# from the end of the log. + +# The minimum age of a log file to be eligible for deletion due to age +log.retention.hours=168 + +# A size-based retention policy for logs. Segments are pruned from the log unless the remaining +# segments drop below log.retention.bytes. Functions independently of log.retention.hours. +#log.retention.bytes=1073741824 + +# The maximum size of a log segment file. When this size is reached a new log segment will be created. +log.segment.bytes=1073741824 + +# The interval at which log segments are checked to see if they can be deleted according +# to the retention policies +log.retention.check.interval.ms=300000 + +############################# Zookeeper ############################# + +# Zookeeper connection string (see zookeeper docs for details). +# This is a comma separated host:port pairs, each corresponding to a zk +# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002". +# You can also append an optional chroot string to the urls to specify the +# root directory for all kafka znodes. +zookeeper.connect=localhost:2181 + +# Timeout in ms for connecting to zookeeper +zookeeper.connection.timeout.ms=6000 + + +############################# Group Coordinator Settings ############################# + +# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance. +# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms. +# The default value for this is 3 seconds. +# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing. +# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup. +group.initial.rebalance.delay.ms=0 diff --git a/MSH-PIC/kafka/config/tools-log4j.properties b/MSH-PIC/kafka/config/tools-log4j.properties new file mode 100644 index 0000000..b19e343 --- /dev/null +++ b/MSH-PIC/kafka/config/tools-log4j.properties @@ -0,0 +1,21 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +log4j.rootLogger=WARN, stderr + +log4j.appender.stderr=org.apache.log4j.ConsoleAppender +log4j.appender.stderr.layout=org.apache.log4j.PatternLayout +log4j.appender.stderr.layout.ConversionPattern=[%d] %p %m (%c)%n +log4j.appender.stderr.Target=System.err diff --git a/MSH-PIC/kafka/config/truststore.jks b/MSH-PIC/kafka/config/truststore.jks Binary files differnew file mode 100644 index 0000000..b435e09 --- /dev/null +++ b/MSH-PIC/kafka/config/truststore.jks diff --git a/MSH-PIC/kafka/config/zookeeper.properties b/MSH-PIC/kafka/config/zookeeper.properties new file mode 100644 index 0000000..74cbf90 --- /dev/null +++ b/MSH-PIC/kafka/config/zookeeper.properties @@ -0,0 +1,20 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# the directory where the snapshot is stored. +dataDir=/tmp/zookeeper +# the port at which the clients will connect +clientPort=2181 +# disable the per-ip limit on the number of connections since this is a non-production config +maxClientCnxns=0 |