| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The test suite currently covers:
1. SENDUIPI base IPC tests
2. UINTR Syscall unit tests
3. SENDUIPI instruction fault tests
4. A configurable IPC test to stress context switching
Planning to add the following in the future:
1. More context switching tests
2. UIF related tests
3. uintr_wait() syscall tests
4. Kernel to user notification tests
5. Stack adjust tests
Signed-off-by: Gayatri Kammela <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Add a sample application to showcase user IPI usage.
<This sample is also included in the manpage for uintr related syscalls.
Eventually planning to move this to /samples.>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Include 2 basic tests for receiving a User IPI:
1. Receiver is spinning in userspace.
2. Receiver is blocked in the kernel.
The selftests need gcc with 'muintr' support to compile.
GCC 11 (recently released) has support for this.
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Wire up the user interrupt receiver and sender related syscalls for
x86_64.
For rest of the architectures the syscalls are not implemented.
<TODO: Reserve the syscall numbers for other architectures>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Add a new system call to allow applications to block in the kernel and
wait for user interrupts.
<The current implementation doesn't support waking up from other
blocking system calls like sleep(), read(), epoll(), etc.
uintr_wait() is a placeholder syscall while we decide on that
behaviour.>
When the application makes this syscall the notification vector is
switched to a new kernel vector. Any new SENDUIPI will invoke the kernel
interrupt which is then used to wake up the process.
Currently, the task wait list is global one. To make the implementation
scalable there is a need to move to a distributed per-cpu wait list.
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Add a registration syscall for a task to register itself as a user
interrupt sender using the uintr_fd generated by the receiver. A task
can register multiple uintr_fds. Each unique successful connection
creates a new entry in the User Interrupt Target Table (UITT).
Each entry in the UITT table is referred by the UITT index (uipi_index).
The uipi_index returned during the registration syscall lets a sender
generate a user IPI using the 'SENDUIPI <uipi_index>' instruction.
Also, add a sender unregister syscall to unregister a particular task
from the uintr_fd. Calling close on the uintr_fd will disconnect all
threads in a sender process from that FD.
Currently, the UITT size is arbitrarily chosen as 256 entries
corresponding to a 4KB page. Based on feedback and usage data this can
either be increased/decreased or made dynamic later.
Architecturally, the UITT table can be unique for each thread or shared
across threads of the same thread group. The current implementation
keeps the UITT as unique for the each thread. This makes the kernel
implementation relatively simple and only threads that use uintr get
setup with the related structures. However, this means that the
uipi_index for each thread would be inconsistent wrt to other threads.
(Executing 'SENDUIPI 2' on threads of the same process could generate
different user interrupts.)
Alternatively, the benefit of sharing the UITT table is that all threads
would see the same view of the UITT table. Also the kernel UITT memory
allocation would be more efficient if multiple threads connect to the
same uintr_fd. However, this would mean the kernel needs to keep the
UITT table size MISC_MSR[] in sync across these threads. Also the
UPID/UITT teardown flows might need additional consideration.
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Each receiving task has its own interrupt vector space of 64 vectors.
For each vector registered by a task create a uintr_fd. Only tasks that
have previously registered a user interrupt handler can register a
vector.
The sender for the user interrupt could be another userspace
application, kernel or an external source (like a device). Any sender
that wants to generate a user interrupt needs access to receiver's
vector number and UPID. uintr_fd abstracts that information and allows
a sender with access to uintr_fd to connect and generate a user
interrupt. Upon interrupt delivery, the interrupt handler would be
invoked with the associated vector number pushed onto the stack.
Using an FD abstraction automatically provides a secure mechanism to
connect with a receiver. It also makes the tracking and management of
the interrupt vector resource easier for userspace.
uintr_fd can be useful in some of the usages where eventfd is used for
userspace event notifications. Though uintr_fd is nowhere close to a
drop-in replacement, the semantics are meant to be somewhat similar to
an eventfd or the write end of a pipe.
Access to uintr_fd can be achieved in the following ways:
- direct access if the task is part of the same thread group (process)
- inherited by a child process.
- explicitly shared using any of the FD sharing mechanisms.
If the sender is another userspace task, it can use the uintr_fd to send
user IPIs to the receiver. This works in conjunction with the SENDUIPI
instruction. The details related to this are covered later.
The exact APIs for the sender being a kernel or another external source
are still being worked upon. The general idea is that the receiver would
pass the uintr_fd to the kernel by extending some existing API (like
io_uring).
The vector associated with uintr_fd can be unregistered by closing all
references to the uintr_fd.
Signed-off-by: Sohil Mehta <[email protected]>
|
|
The user interrupt MSRs and the user interrupt state is task specific.
During task fork and exit clear the task state, clear the MSRs and
dereference the shared resources.
Some of the memory resources like the UPID are referenced in the file
descriptor and could be in use while the uintr_fd is still valid.
Instead of freeing up the UPID just dereference it. Eventually when
every user releases the reference the memory resource will be freed up.
Signed-off-by: Jacob Pan <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
User interrupt state is saved and restored using xstate supervisor
feature support. This includes the MSR state and the User Interrupt Flag
(UIF) value.
During context switch update the UPID for a uintr task to reflect the
current state of the task; namely whether the task should receive
interrupt notifications and which cpu the task is currently running on.
XSAVES clears the notification vector (UINV) in the MISC MSR to prevent
interrupts from being recognized in the UIRR MSR while the task is being
context switched. The UINV is restored back when the kernel does an
XRSTORS.
However, this conflicts with the kernel's lazy restore optimization
which skips an XRSTORS if the kernel is scheduling the same user task
back and the underlying MSR state hasn't been modified. Special handling
is needed for a uintr task in the context switch path to keep using this
optimization.
Signed-off-by: Jacob Pan <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Any application that wants to receive a user interrupt needs to register
an interrupt handler with the kernel. Add a registration syscall that
sets up the interrupt handler and the related kernel structures for
the task that makes this syscall.
Only one interrupt handler per task can be registered with the
kernel/hardware. Each task has its private interrupt vector space of 64
vectors. The vector registration and the related FD management is
covered later.
Also add an unregister syscall to let a task unregister the interrupt
handler.
The UPID for each receiver task needs to be updated whenever a task gets
context switched or it moves from one cpu to another. This will also be
covered later. The system calls haven't been wired up yet so no real
harm is done if we don't update the UPID right now.
<Code typically in the x86/kernel directory doesn't deal with file
descriptor management. I have kept uintr_fd.c separate to make it easier
to move it somewhere else if needed.>
Signed-off-by: Jacob Pan <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
A user interrupt notification vector is used on the receiver's cpu to
identify an interrupt as a user interrupt (and not a kernel interrupt).
Hardware uses the same notification vector to generate an IPI from a
sender's cpu core when the SENDUIPI instruction is executed.
Typically, the kernel shouldn't receive an interrupt with this vector.
However, it is possible that the kernel might receive this vector.
Scenario that can cause the spurious interrupt:
Step cpu 0 (receiver task) cpu 1 (sender task)
---- --------------------- -------------------
1 task is running
2 executes SENDUIPI
3 IPI sent
4 context switched out
5 IPI delivered
(kernel interrupt detected)
A kernel interrupt can be detected, if a receiver task gets scheduled
out after the SENDUIPI-based IPI was sent but before the IPI was
delivered.
The kernel doesn't need to do anything in this case other than receiving
the interrupt and clearing the local APIC. The user interrupt is always
stored in the receiver's UPID before the IPI is generated. When the
receiver gets scheduled back the interrupt would be delivered based on
its UPID.
Signed-off-by: Jacob Pan <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Enable xstate supervisor support for User Interrupts by default.
The user interrupt state for a task consists of the MSR state and the
User Interrupt Flag (UIF) value. XSAVES and XRSTORS handle saving and
restoring both of these states.
<The supervisor XSTATE code might be reworked based on issues reported
in the past. The Uintr context switching code would also need rework and
additional testing in that regard.>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
User Interrupts support including user IPIs is enumerated through cpuid.
The 'uintr' flag in /proc/cpuinfo can be used to identify it. The
recommended mechanism for user applications to detect support is calling
the uintr related syscalls.
Use CONFIG_X86_USER_INTERRUPTS to compile with User Interrupts support.
The feature can be disabled at boot time using the 'nouintr' kernel
parameter.
SENDUIPI is a special ring-3 instruction that makes a supervisor mode
memory access to the UPID and UITT memory. Currently, KPTI needs to be
off for User IPIs to work. Processors that support user interrupts are
not affected by Meltdown so the auto mode of KPTI will default to off.
Users who want to force enable KPTI will need to wait for a later
version of this patch series that is compatible with KPTI. We need to
allocate the UPID and UITT structures from a special memory region that
has supervisor access but it is mapped into userspace. The plan is to
implement a mechanism similar to LDT.
Signed-off-by: Jacob Pan <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
For now, include just the hardware and software architecture summary.
<This is the same content as the cover letter.
Some of the kernel design details and other information from the cover
letter can eventually be moved here.>
Signed-off-by: Sohil Mehta <[email protected]>
|
|
Included here in plain text format for reference and review.
<Will eventually send the man pages in groff format separately to the
man-pages repository.>
The formatting for the man pages still needs a little bit of work.
Signed-off-by: Sohil Mehta <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
|
|
git://github.com/ojeda/linux
Pull compiler attributes updates from Miguel Ojeda:
- Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)
- Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)
- Move __compiletime_{error|warning} (Nick Desaulniers)
* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
compiler_attributes.h: move __compiletime_{error|warning}
MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
|
|
Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:
- Replace symbolic permissions with octal permissions (Jinchao Wang)
- ks0108: Switch to use module_parport_driver() (Andy Shevchenko)
- charlcd: Drop unneeded initializers and switch to C99 style (Andy
Shevchenko)
- hd44780: Fix oops on module unloading (Lars Poeschel)
- Add I2C gpio expander example (Ralf Schlatterbeck)"
* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace symbolic permissions with octal permissions
auxdisplay: ks0108: Switch to use module_parport_driver()
auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
auxdisplay: hd44780: Fix oops on module unloading
auxdisplay: Add I2C gpio expander example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
|
|
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle negative second values properly when converting a timespec64
to nanoseconds.
* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Handle negative seconds correctly in timespec64_to_ns()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
|
|
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
|
|
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A pair of defconfig additions, for NVMe and the EFI filesystem
localization options.
- A larger address space for stack randomization.
- A cleanup to our install rules.
- A DTS update for the Microchip Icicle board, to fix the serial
console.
- Support for build-time table sorting, which allows us to have
__ex_table read-only.
* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move EXCEPTION_TABLE to RO_DATA segment
riscv: Enable BUILDTIME_TABLE_SORT
riscv: dts: microchip: mpfs-icicle: Fix serial console
riscv: move the (z)install rules to arch/riscv/Makefile
riscv: Improve stack randomisation on RV64
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
riscv: defconfig: enable BLK_DEV_NVME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
respect to some recent changes in the kernel.
Specifically, the change to kvmalloc.cocci searches for
kfree_sensitive rather than kzfree, and the change to
use_after_iter.cocci adds list_entry_is_head as a valid
use of a list iterator index variable after the end of
the loop"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccinelle: allow list_entry_is_head() to use pos
coccinelle: api: rename kzfree to kfree_sensitive
|
|
Picking the changes from:
17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")
Doesn't result in any tooling changes:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Simon Ser <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management")
81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete")
7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.")
aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete")
3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI")
c649432e86ca677d ("drm/i915: Fix busy ioctl commentary")
That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Chris Wilson <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jason Ekstrand <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the change in:
7957d93bf32bc211 ("block: add ioctl to read the disk sequence number")
It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Jens Axboe <[email protected]>
Cc: Matteo Croce <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member")
That don't result in any change in tooling, the structs changed remains
with the same layout.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.
This was inspired by:
https://lore.kernel.org/linux-perf-users/[email protected]/T/#u
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: tony garnock-jones <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
$ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID: 53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.
This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"
Example on ADL:
Before:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
# jobs
[1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
# perf top -E 10
PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
97.60% perf [.] __evsel__get_config_term
0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13
0.24% perf [.] kallsyms__parse
0.15% [kernel] [k] _raw_spin_lock
0.14% [kernel] [k] number
0.13% [kernel] [k] advance_transaction
0.08% [kernel] [k] format_decode
0.08% perf [.] map__process_kallsym_symbol
0.08% perf [.] rb_insert_color
0.08% [kernel] [k] vsnprintf
exiting.
# kill %1
After:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
# perf script | head
perf-exec 604 [001] 1827.312293: psb: psb offs: 0 ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches: ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])
Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events")
Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events")
Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some fields are missing and text_poke is duplicated. Fix that up.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.
Fixes: a81df63a5df3e195 ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
- Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
now as we have plenty of flags left, but could become one. (Hao)
- Fix lockdep issue introduced in this merge window (me)
- Fix a few issues with the worker creation (me, Pavel, Qiang)
- Fix regression with wq_has_sleeper() for IOPOLL (Pavel)
- Timeout link error propagation fix (Pavel)
* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
io_uring: fail links of cancelled timeouts
io-wq: fix memory leak in create_io_worker()
io-wq: fix silly logic error in io_task_work_match()
io_uring: drop ctx->uring_lock before acquiring sqd->lock
io_uring: fix missing mb() before waitqueue_active
io-wq: fix cancellation on create-worker failure
|
